EATS- IT  O

Oil Remediation

• Contain sufficient numbers of microflora of the type which can degrade the targeted pollutants.

• Contains microflora that can survive on the targeted waste substance alone and be able to utilize the toxic waste compounds as sole sources of carbon when supplemented with other key mineral nutrients.

• Resistant to toxic effects of the targeted pollutant.

• Ability to multiply and metabolize the targeted compounds in the presence of certain heavy metals.

TREAT WATER SYSTEMS: 

This product should be used at a rate of 3 ppm of water.

BIOREMEDIATION WASTE DIGESTER

CAUTION: KEEP OUT OF REACH OF CHILDREN

DO NOT TAKE INTERNALLY.

Do not allow contact with skin or eyes. In Case of contact flush with water

for 15 minutes. If irritation occurs consult physician. Wear gloves when

using.

Remove waste that can be recovered, reclaimed or removed easily. This removes a high concentration of waste rapidly. This product is used to degrade waste that is too dilute or widespread making it too expensive or impractical to remove.

Petroleum products do not include appreciable nitrogen,

potassium, or phosphorous which microorganisms need to

metabolize the hydrocarbon. Supplementary nitrogen, phosphorous/potassium and other needed nutrients. (These substances are found in slow

release fertilizers.) Maintain a 200:10:1 C:N:P: ratio in the

areas. Make fertilizer application monthly.

When treating a land mass: Make a slurry at a rate of 1 lb. per

gallon of chlorine free water. Spray over area to be treated.

Biodegradable wetting agent maybe used in conjunction

with this system to help emulsify petrochemicals so that

the surface area subject to attack by the microbes is greatly

expanded. Apply slurry to area as soon as it is prepared.

Generally shallow soil incorporation of the microbe/surfactant/fertilizer is advisable.

Periodic tilling assists in redistributing moisture, temperature and added nutrients. Aeration is helpful in reducing the time for effective removal of hydrocarbon.